Class 600 1 1/2'' SORF FF RTJ Slip on welding flange R50400/GR.2 titanium pipe fitting flange
1. Titanium flange
2.sch5s-schxxs
3.ISO9001,ISO9000
4.Market:America,Africa,Middle East,Southeast of Asia
ASTM R50400/GR.2 flange
| Product Name | ASTM R50400/GR.2 flange |
| Standard | ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Type | 1.4835 (UNS S30815 – 253MA – SS2368)flange |
| Materials | Stainless steel:ASTM/ASMES/A182 F304 | F304L |F304H | F316 | F316L | F321 | F321H | F347|316Ti | 309S |310S | 405 |409|410 | 410S | 416 | 420 | 430 | 630 | 660 | 254SMO | 253MA | 353MA Nickel Alloy: ASTM/ASME S/B366 UNS N08020 | N04400| N06600 | N06625 | N08800 | N08810 | N08825 | N10276 | N10665 | N10675 | Incoloy 800 | Incoloy 800H | Incoloy 800HT | Incoloy 825 | Incoloy 901 | Incoloy 925 | Incoloy 926, Inconel 600 | Inconel 601 | Inconel 625 | Inconel 706 | Inconel 718 | Inconel X-750, Monel 400 | Monel 401 | Monel R 405 | Monel K 500
Super Stainless Steel: ASTM/ASME S/A182 F44, F904L, F317L S32750 | S32760 Hastelloy:HastelloyB | HastelloyB-2 | HastelloyB-3 | HastelloyC-4 | Hastelloy C-22 | Hastelloy C-276 | Hastelloy X |Hastelloy G | Hastelloy G3
Nimonic: Nimonic 75 | Nimonic 80A | Nimonic 90
Duplex Steel: ASTM A182 F51 | F53 | F55, S32101 | S32205 | S31803 | S32304
Alloy Steel: ASTM/ASME S/ A182 F11 | F12 | F22 | F5 | F9 | F91 Carbon steel: API 5L... |
| Marking | Supply Logo + Standard + Size(mm) + HEAT NO +or as your requirement |
| Test | Chemical Component Analysis, Mechanical Properties, Metallurgical Analysis, Impact Testing, Hardness testing , Ferrite Testing, Intergranular corrosion testing, X-ray Inspection (RT), PMI, PT, UT, HIC & SSC test, etc. or as your requirment |
| Certificates | API, ISO, SGS, BV, CE, PED, KOC, CCRC, PDO, CH2M HILL and etc. |
| Applications | Ø EN 1.4835 has a good weldability and can be welded using the following methods: - Shielded metal arc welding (SMAW)
- Gas tungsten arc welding, GTAW (TIG)
- Plasma arc welding (PAW)
- Gas metal arc GMAW (MIG)
- Submerged-arc welding (SAW)
- Typical application areas for 1.4835:
- Ovens
- Construction
- Building
- As details at high temperature
|
| Advantages | |
Unit : inch
Nominal
Pipe
Size | Outside Dia.
(OD) | Wall Thickness (T) | 90o L/R Elbow Center To End A | 45o L/R Elbow Center To End B | 90o S/R Elbow Center To End A | Tees Center To Ends C.M | Cap Length
E | | Sch.5S | Sch.10S | Sch.40S | Sch.80S | | 1/2 | 0.840 | 0.065 | 0.083 | 0.109 | 0.147 | 1.50 | 0.625 | | 1.00 | 1.00 | | 3/4 | 1.050 | 0.065 | 0.083 | 0.113 | 0.154 | 1.12 | 0.438 | | 1.13 | 1.00 | | 1 | 1.315 | 0.065 | 0.109 | 0.133 | 0.179 | 1.50 | 0.875 | 1.00 | 1.50 | 1.50 | | 1-1/4 | 1.660 | 0.065 | 0.109 | 0.140 | 0.191 | 1.88 | 1.00 | 1.25 | 1.88 | 1.50 | | 1-1/2 | 1.900 | 0.065 | 0.109 | 0.145 | 0.200 | 2.25 | 1.12 | 1.50 | 2.25 | 1.50 | | 2 | 2.375 | 0.065 | 0.109 | 0.154 | 0.218 | 3.00 | 1.38 | 2.00 | 2.50 | 1.50 | | 2-1/2 | 2.875 | 0.083 | 0.120 | 0.203 | 0.276 | 3.75 | 1.75 | 2.50 | 3.00 | 2.00 | | 3 | 3.500 | 0.083 | 0.120 | 0.216 | 0.300 | 4.50 | 2.00 | 3.00 | 3.38 | 2.50 | | 4 | 4.500 | 0.083 | 0.120 | 0.237 | 0.337 | 6.00 | 2.50 | 4.00 | 4.13 | 3.00 | | 5 | 5.563 | 0.109 | 0.134 | 0.258 | 0.375 | 7.50 | 3.12 | 5.00 | 4.88 | 3.50 | | 6 | 6.625 | 0.109 | 0.134 | 0.280 | 0.432 | 9.00 | 3.75 | 6.00 | 5.63 | 4.00 | | 8 | 8.625 | 0.109 | 0.148 | 0.322 | 0.500 | 12.00 | 5.00 | 8.00 | 7.00 | 5.00 | | 10 | 10.750 | 0.134 | 0.165 | 0.375 | 0.500 | 15.00 | 6.25 | 10.00 | 8.50 | 6.00 | | 12 | 12.750 | 0.156 | 0.180 | 0.375 | 0.500 | 18.00 | 7.50 | 12.00 | 10.00 | 7.00 | | 14 | 14.000 | 0.156 | 0.250 | 0.375 | 0.500 | 21.00 | 8.75 | 14.00 | 11.00 | 7.50 | | 16 | 16.000 | 0.165 | 0.250 | 0.375 | 0.500 | 24.00 | 10.00 | 16.00 | 12.00 | 8.00 | | 18 | 18.000 | 0.165 | 0.250 | 0.375 | 0.500 | 27.00 | 11.25 | 18.00 | 13.50 | 9.00 | | 20 | 20.000 | 0.188 | 0.250 | 0.375 | 0.500 | 30.00 | 12.50 | 20.00 | 15.00 | 10.00 | | 24 | 24.000 | 0.218 | 0.250 | 0.375 | 0.500 | 36.00 | 13.50 | 24.00 | 17.00 | 12.00 | |
Unit : inch
Nominal
Pipe
Size | Outside Dia.
(OD) | Wall Thickness (T) | 90o L/R Elbow Center To End A | 45o L/R Elbow Center To End B | 90o S/R Elbow Center To End A |
| Sch.5S | Sch.10S | Sch.40S | Sch.80S |
| 1/2 | 0.840 | 0.065 | 0.083 | 0.109 | 0.147 | 1.50 | 0.625 | |
| 3/4 | 1.050 | 0.065 | 0.083 | 0.113 | 0.154 | 1.12 | 0.438 | |
| 1 | 1.315 | 0.065 | 0.109 | 0.133 | 0.179 | 1.50 | 0.875 | 1.00 |
| 1-1/4 | 1.660 | 0.065 | 0.109 | 0.140 | 0.191 | 1.88 | 1.00 | 1.25 |
| 1-1/2 | 1.900 | 0.065 | 0.109 | 0.145 | 0.200 | 2.25 | 1.12 | 1.50 |
| 2 | 2.375 | 0.065 | 0.109 | 0.154 | 0.218 | 3.00 | 1.38 | 2.00 |
| 2-1/2 | 2.875 | 0.083 | 0.120 | 0.203 | 0.276 | 3.75 | 1.75 | 2.50 |
| 3 | 3.500 | 0.083 | 0.120 | 0.216 | 0.300 | 4.50 | 2.00 | 3.00 |
| 4 | 4.500 | 0.083 | 0.120 | 0.237 | 0.337 | 6.00 | 2.50 | 4.00 |
| 5 | 5.563 | 0.109 | 0.134 | 0.258 | 0.375 | 7.50 | 3.12 | 5.00 |
| 6 | 6.625 | 0.109 | 0.134 | 0.280 | 0.432 | 9.00 | 3.75 | 6.00 |
| 8 | 8.625 | 0.109 | 0.148 | 0.322 | 0.500 | 12.00 | 5.00 | 8.00 |
| 10 | 10.750 | 0.134 | 0.165 | 0.375 | 0.500 | 15.00 | 6.25 | 10.00 |
| 12 | 12.750 | 0.156 | 0.180 | 0.375 | 0.500 | 18.00 | 7.50 | 12.00 |
| 14 | 14.000 | 0.156 | 0.250 | 0.375 | 0.500 | 21.00 | 8.75 | 14.00 |
| 16 | 16.000 | 0.165 | 0.250 | 0.375 | 0.500 | 24.00 | 10.00 | 16.00 |
| 18 | 18.000 | 0.165 | 0.250 | 0.375 | 0.500 | 27.00 | 11.25 | 18.00 |
| 20 | 20.000 | 0.188 | 0.250 | 0.375 | 0.500 | 30.00 | 12.50 | 20.00 |
| 24 | 24.000 | 0.218 | 0.250 | 0.375 | 0.500 | 36.00 | 13.50 | 24.00 |
Titanium usage in different:
CP grade1 can be used in the deep drawing parts for its good elogation and excellent corrossion-resistance.
CP grade2 is widely used in the commercially pure Titanium.
CP grade3 is almost only used in the pressure vessel.
CP grade4 can be used in some fittings and fastening pieces,but for complete shape need 300 degree celsius to form
Alloy Gr5 ,Ti6AL4V,is one of the most popular Ti alloys because of itscomprehensive
mechanical,physical and chemical properties.
Alloy Gr7,add little palladium in cp Titanium and it has the most excellent corrosion-resistence
Alloy Gr9,Ti3AL2.5v,is used mostly in the golf clubs and bicycle girders.
Alloy Gr12,it has the similar properties with the grade7.
TItanium tube process:
Titanium sponge→Compacting electrodes→Melting→Foring→Bar billets→ Extruding→Rolling→Strightening→Seamless Tubes
Material Description
Common titanium material
| Alloy composition | GB | ATME | JIS | DIN |
| Ti | TA0 | R50250/GR.1 | 1type | 3.7025 |
| | TA1 | R50400/GR.2 | 2type | 3.7035 |
| | TA2 | R50550/GR.3 | 3type | 3.7055 |
| | TA3 | R50700/GR.4 | 4type | 3.7065 |
| | TA7 | GR.6 | | 3.7115 |
| Ti-0.23Pb | TA9 | R52400/GR.7 | 12type | 3.7235 |
| Ti-0.3Mo-0.8Ni | TA10 | R53400/GR.12 | | 3.7105 |
| Ti-3Al-2.5V | TC2 | R56320/GR.9 | | |
| Ti-6Al-4V | TC4 | R56400/GR.5 | 60type | 3.7175 |
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer ,You can see the Alibaba certification.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Att:
Tel: 0086 21 31261985
WhatsApp & Skype: 0086-15710108231
Trade Manager:
Product Tags:
|
|
Class 600 1 1/2'' SORF FF RTJ Slip On Welding Flange R50400/GR.2 Titanium Pipe Fitting Flange Images
|
